Operation Manual

261
Under the Network Parameters tab on the TCP/IP Property page, configure the following
settings:
Network Speed
Select the network transfer rate according to the network environment to which the NAS
is connected. Select auto negotiation and the NAS will adjust the transfer rate
automatically.
Obtain the IP address settings autom atically via DHCP
If the network supports DHCP, select this option and the NAS will obtain the IP address
and network settings automatically.
Use static IP address
To use a static IP address for network connection, enter the IP address, subnet mask,
and default gateway.
Jum bo Fram e Settings (MTU)
This feature is not supported by TS-509 Pro, TS-809 Pro, and TS-809U-RP.
“Jumbo Frames” refer to the Ethernet frames that are larger than 1500 bytes. It is