Operation Manual

260
4.3 Network
T CP/IP
(i) IP Address
Configure the TCP/IP settings, DNS Server and default Gateway of the NAS on this
page.
Click to edit the network settings. For the NAS with two LAN ports, users can
connect both network interfaces to two different switches and configure the TCP/IP
settings. The NAS will acquire two IP addresses which allow access from two different
subnets. This is known as multi-IP settings*. When using the Finder to detect the NAS
IP, the IP of the Ethernet 1 will be shown in LAN 1 only and the IP of the Ethernet 2 will
be shown in LAN 2 only. To use the port trunking mode for dual LAN connection, see
section (iii).
* TS-110, TS-119, TS-210, TS-219, TS-219P, TS-119P+, TS-219P+, TS-112, and TS-
212 provide one Giga LAN port only therefore do not support dual LAN configuration or
port trunking.
Network Param eters