Operation Manual

257
2. Enter the target server IP and port number (default: 3260). Click “Get Remote Disk”
and select a target from the target list. If authentication is required, enter the
username and the password. Select the options “Data Digest” and/or “Header
Digest” (optional). These are the parameters for which the iSCSI initiator is verified
when it attempts to connect to the iSCSI target. Then, click “Next”.
3. Enter a name for the virtual disk. If the target is mapped with multiple LUNs, select a
LUN from the list. Make sure that only this NAS can connect to the LUN. The NAS
supports mounting EXT3, EXT4, FAT32, NTFS, HFS+ file systems. If the file system
of the LUN is “Unknown”, select “Format virtual disk now” and choose the file
system. You can format the virtual disk as EXT3, EXT4, FAT 32, NTFS, or HFS+. By
selecting “Format virtual disk now”, the data on the LUN will be cleared. Then, click
“Next”.