Operation Manual

246
Creating iSCSI LUN Snapshots
A read-only LUN snapshot can be created and mounted to an iSCSI target on the NAS
for data access from other hosts or LUN backup. The contents of the LUN snapshot will
remain the same regardless of the changes made to the original LUN.
Before creating an iSCSI LUN snapshot, make sure that at least one iSCSI LUN and one
iSCSI target have been created on the NAS. To create an iSCSI target and LUN, follow
the steps below:
1. Go to “Storage Manager” > “LUN Backup”. Click “Create a job”.
2. Select “Create a LUN Snapshot” and click “Next”.