Operation Manual

212
Before you start to use the iSCSI target service, make sure you have created an iSCSI
target with a LUN on the NAS and installed the correct iSCSI initiator for your OS.
ISCSI initiator on Windows:
Microsoft iSCSI Software Initiator v2.07 is an official application for Windows OS 2003,
XP, and 2000 to allow users to implement an external iSCSI storage array over the
network. If you are using Windows Vista or Windows Server 2008, Microsoft iSCSI
Software Initiator is included. For more information and the download location, visit:
http://www.microsoft.com/downloads/details.aspx?familyid=12cb3c1a-15d6-4585-b385-
befd1319f825&displaylang=en
Start iSCSI initiator from “Control Panel” > “Administrative Tools”. Under the “Discovery”
tab click “Add Portal”. Enter the NAS IP and the port number for the iSCSI service.
The available iSCSI targets and their status will then be shown under the “Targets” tab.
Select the target you wish to connect then click “Connect”.