Operation Manual

203
Connected
The iSCSI target has been connected
by an initiator.
Disconnected
The iSCSI target has been
disconnected.
Offline
The iSCSI target has been deactivated
and cannot be connected by the
initiator.
LUN
Enabled
The LUN is active for connection and
is visible to authenticated initiators.
Disabled
The LUN is inactive and is invisible to
the initiators.
Refer to the table below for actions (the “Action” button in the figure above) available to
manage iSCSI targets and LUNs:
Action
Description
Deactive
Deactivate a ready or connected target. Note that the
connection from the initiators will be removed.
Activate
Activate an offline target.
Modify
Modify the target settings: target alias, CHAP information, and
checksum settings.
Modify the LUN settings: LUN allocation, name, disk volume
directory, etc.
Delete
Delete an iSCSI target. All the connections will be removed.
Disable
Disable an LUN. All the connections will be removed.
Enable
Enable an LUN.
Un-map
Un-map the LUN from the target. Note that a LUN must first be
disabled before it can be un-mapped. When clicking this button,
the LUN will be moved to the un-mapped iSCSI LUN list.
Map
Map the LUN to an iSCSI target. This option is only available on
the un-mapped iSCSI LUN list.
View Connections
View the connection status of an iSCSI target.