Operation Manual

191
5. Enter the CHAP authentication settings and click “Next”. Check “Use CHAP
authentication” and only the initiator will be authenticated by the iSCSI target, and
users of the initiators are required to enter the username and password specified
here to access the target. Check “Mutual CHAP” for two-way authentication
between the iSCSI target and the initiator. The target authenticates the initiator
using the first set of username and password. The initiator authenticates the target
using the “Mutual CHAP” settings.
Field
Username lim itation
Password lim itation
Use CHAP
authentication
The only valid characters are
0-9, a-z, A-Z
Maximum length: 256
characters
The only valid characters are
0-9, a-z, A-Z
Maximum length: 12-16
characters
Mutual CHAP
The only valid characters are
0-9, a-z, A-Z, : (colon), .
(dot), and - (dash)
Maximum length: 12-16
characters
The only valid characters are
0-9, a-z, A-Z, : (colon), .
(dot), and - (dash)
Maximum length: 12-16
characters