Operation Manual

157
Locate (under “Action”)
Click this button and the chassis LEDs of the selected
expansion enclosure will blink for easy identification.
Update firmware (under
“Action”)
Click this button to update firmware for the chosen
enclosure.
Rename enclosure
(under “Action”)
Click this button to rename the chosen enclosure.
RAID Group
Click this button and select a RAID group to check its
details, including capacity, RAID group name, RAID type and
disk member.
Total Disk List
Click this button to show or filter for the disks. Set the filter
from the drop down list to show only hard disks based on the
enclosure or NAS they belong to, model, type (HDD or SSD),
BUS type, capacity, used type (data, free, error, spare,
cache, or none) and status. Click “Refresh” to refresh the
list.