Operation Manual

156
Settings
Configure the following settings on this page: 1) Enable
Temperature Alarm: enable this option to set the temperature
alarm. When the hard disk temperature exceeds the specified
threshold level, the system will record an error message; and 2)
Rapid and complete test schedules: schedule a rapid or complete
test here. The result of the latest test can be viewed on the
“Summary” page.
Click “APPLY to Selected HDD” to apply the settings configured on
this page only to the selected hard disk drive or “APPLY to All
HDDs” to all hard disk drives.
Managing Expansion Enclosures
First click an expansion enclosure (REXP) under “System Component” to check its general
information.
Refer to the following table for actions available to manage an expansion enclosure:
Action
Description
Enclosure Info
Click this button to check on details of the chosen
enclosure, including the enclosure model, serial number,
firmware version, BUS type, CPU temperature, system
temperature, power status, system fan speed and power fan
speed.