User manual

95
3.4.4 FTP Service
When you enable the FTP service, you can define the port number for the service
and the maximum number of users connected to the FTP at the same time.
To use the FTP service of the NAS, enable this function. Open an IE browser and
enter ftp://NAS IP. Enter the user name and the password to login the FTP service.
 Select Protocol Type
Select to use standard FTP connection or SSL/TLS encrypted FTP. Select the
corresponding protocol type in your client FTP software to ensure successful
connection.
“SFTP” requires SSH to be enabled. Only the “admin” user account can access
the NAS via SFTP.
 Unicode Support
Select to enable or disable Unicode Support. The default setting is No. Since
most FTP clients do not support Unicode currently, it is recommended that you
disable Unicode support here and select the same language as your OS in
“General Settings” > “Language” so that the folders and files on the FTP can
be properly shown. If your FTP client supports Unicode, make sure you have
enabled Unicode support for both your client and the NAS.
 Anonymous Login
You can enable anonymous login to allow anonymous access to the FTP server
of the NAS. The users can access the files and folders which are opened for