User manual

7. Close the case cover and fasten the screws. Connect the power adaptor and cables
back to the NAS.
8. To check that the memory module is recognized by the NAS, power up the NAS and
login the web interface as an administrator. Go to “System Status” > “System
Information” and check the total memory in “Hardware Information”.
5.3 TS-431U, TS-451U, TS-x53U series (4/8/12-bay)
1. Open the NAS.
a. TS-431U, TS-451U and TS-453U: Loosen the six screws on the top of the NAS.
33