User manual

Beep
alarm: All NAS models
The beep alarm can be disabled in “System Administration” > “Hardware Settings”.
Beep sound Number of
Times
Description
Short beep (0.5 sec) 1 1. The NAS is starting up
2. The NAS is being shut down
(software shutdown)
3. The user presses the reset button
to reset the NAS
4. The system firmware has been
updated
Short beep (0.5 sec) 3 The user tries to copy the NAS data to
the external storage device from the
front USB port, but the data cannot be
copied.
Long beep (1.5 sec) 3, every 5 min
The system fan is out of function
(TS-119 does not support smart fan.)
2 1. The disk volume is going to be full
2. The disk volume has reached its
full capacity
3. The hard drives on the NAS are in
degraded mode
4. The user starts the HDD rebuilding
process
5. HDD plug-in/plug-out
Long beep (1.5 sec)
1 1. The NAS is turned off by force
shutdown (hardware shutdown)
2. The NAS has been turned on
successfully and is ready
19