User manual

Chapter 3. USB One Touch Copy

System

Number of seconds (press the one touch copy

button to trigger data copy)

All NAS models 0.5 sec

Data Copy by the Front USB Port

The NAS supports instant data copy backup from the external USB device to the

NAS or the other way round by the front one touch copy button. To use this

function, follow the steps below:

1. Make sure a hard drive is installed and formatted on the NAS. The default

network share Qusb or Usb is created.

2. Turn on the NAS.

3. Configure the behaviour of the Copy button on “Backup” > “USB one touch

copy” page.

4. Connect the USB storage device to the front USB port of the NAS.

5. Press the Copy button. The USB LED will flash. The data will be copied to or

from the USB device according to your settings on the NAS.

Note: This feature adopts incremental backup. After the first time data backup,

the NAS only copies the changed files since the last backup.