User manual

Chapter 2. Power Button and Reset Button Behaviour

 Power button: Press to turn on or turn off.

System

Power button

(Turn on)

Power button

(Hardware turn

off)

Power button

(Force turn off)

All models Press once 1.5 sec 5 sec

 Reset button: Press to reset the system settings.

System

Basic system reset

(1 beep)

Advanced system reset

(2 beeps)

All models 3 sec 10 sec

Basic system reset (3 sec)

When you press the reset button for 3 seconds, a beep sound will be heard. The

following settings are reset to default:

 System administration password: admin

 TCP/IP configuration: Obtain IP address settings automatically via DHCP

 TCP/IP configuration: Disable Jumbo Frame

 TCP/IP configuration: If port trunking is enabled (dual LAN models only), the

port trunking mode will be reset to “Active Backup (Failover)”.

 System Port: 8080 (system service port)

 Security Level: Low (Allow all connections)

 LCD panel password: (blank)*

This feature is only provided by TS-439 Pro, TS-439 Pro II, TS-459 Pro, TS-509 Pro,

TS-559 Pro, TS-639 Pro, TS-659 Pro, SS-839 Pro, TS-859 Pro, TS-809 Pro,

TS-809U-RP, TS-859U-RP, TS-259 Pro+, TS-459 Pro+, TS-559 Pro+, TS-659 Pro+.