User Manual

145
at least 6 characters.
C re a ting a Use r
To create a user on the NAS, follow the steps below:
1. Go to "Control Panel" > "Privilege Settings" > "Users".
2. Click "Create" > "Create a User".
3. Follow the instructions of the wizard to complete the details.
C re a ting Multiple Us e rs
To create multiple users on the NAS, follow the steps below:
1. Go to "Control Panel" > "Privilege Settings" > "Users".
2. Click "Create" > "Create Multiple Users".
3. Click "Next".
4. Enter the name prefix, e.g. test. Enter the start number for the username, e.g. 0001
and the number of users to be created, e.g. 10. The NAS creates ten users named
test0001, test0002, test0003…test0010. The password entered here is the same for
all the new users.
5. Select to create a private shard folder for each user or not. The shared folder will be
named after the username. If a shared folder of the same name has already existed,
the NAS will not create the folder.
6. Specify the folder settings.
7. You can view the new users created in the last step. Click "Finish" to exit the wizard.
8. Check that the users have been created.
9. Check that the shared folders have been created for the users.
Im po rting /E x porting Us e rs
You can import users to or export users from the NAS with this function.
Ex porting us e rs
Follow the steps below to export users from the NAS:
1. Go to "Control Panel" > "Privilege Settings" > "Users".
2. Click "Create" > "Import/Export Users".
3. Select the option "Export user and user group settings".
4. Click "Next" to download and save the account setting file (*.bin). The file can be
imported to another NAS for account setup.