User's Manual

Message Type System Message Description
Event Port {1} Connected
To {2}
A host was connected to the port.
• {1}: Port ID
• {2}: Host server name
Fan Speed Set
To {1}
The fan speed setting was changed.
{1}: Fan speed setting:
• Auto
• High
• Medium
• Low
Error Port {1} Disconn.
From {2}
A host was disconnected from the port.
• {1}: Port ID
• {2}: Host server name
Fan {1} Error The fan is not functioning normally.
{1}: Fan ID
Temp. Warning The JBOD enclosure is overheated.
Note
The default temperature warning
threshold is 65°C.
Temp. Critical The JBOD enclosure is critically overheated.
Note
The temperature critical threshold is
70°C.
Confirmation Clear messages? Clear event and error messages.
Tip
• Press Select to toggle between Yes
and No.
• Press Enter to confirm.
LEDs
LEDs indicate system status and related information when the device is powered on. The following LED
information applies only when the drive is correctly installed and when the device is connected to the
network or to a host.
For details on the location of the LEDs, see Front Panel.
QNAP JBOD Enclosure User Guide
Basic Operations 29