User manual

Safety Warnings

1. The RAID expansion enclosure can operate normally in the temperature of 0ºC–40ºC

and relative humidity of 0%–60%. Please make sure the environment is

well-ventilated.

2. The power cord and devices connected to the RAID expansion enclosure must provide

correct supply voltage (100-240V AC, 50-60Hz).

3. Do not place the RAID expansion enclosure in direct sunlight or near chemicals. Make

sure the temperature and humidity of the environment are in optimized level.

4. Unplug the power cord and all connected cables before cleaning. Wipe the RAID

expansion enclosure with a dry towel. Do not use chemical or aerosol to clean the RAID

expansion enclosure.

5. Do not place any objects on the RAID expansion enclosure for the server’s normal

operation and to avoid overheat.

6. Use the flat head screws in the product package to lock the hard disks in the RAID

expansion enclosure when installing hard disks for proper operation.

7. Do not place the RAID expansion enclosure near any liquid.

8. Do not place the RAID expansion enclosure on any uneven surface to avoid falling off

and damage.

9. Make sure the voltage is correct in the location where the RAID expansion enclosure is

installed. Contact the distributor or the local power supply company for the

information.

10. Do not place any object on the power cord.

11. Do not attempt to repair the RAID expansion enclosure in any occasions. Improper

disassembly of the product may expose the users to electric shock or other risks. For

any enquiries, please contact the distributor.

12. The RAID expansion enclosure should only be installed in the server room and

maintained by the authorized server manager or IT administrator. The server room is

locked by key or keycard access and only certified staff is allowed to enter the server

room.