User manual

94
5.4.2 RAID Management Tool
*This function is not supported on VS-101, VS-201, NVR-104.
RAID management tool allows you to carry out capacity expansion, RAID migration,
or spare drive configuration with the original drive data reserved.
z Expand capacity
This function enables drive capacity expansion by replacing the drives in a
configuration one by one. This option is supported for the following drive
configurations:
- RAID 1 expansion
- RAID 5 expansion
- RAID 6 expansion
z Add hard drive
This function enables adding new drive member to a drive configuration. It is
supported for the following drive configurations:
- RAID 5 expansion
z Migrate
This function enables a drive configuration to be migrated to a different RAID
configuration. It is supported for the following drive configurations:
- Migrate single drive to RAID 1, 5, or 6
- Migrate RAID 1 to RAID 5 or 6
- Migrate RAID 5 to RAID 6
z Configure spare drive