User manual

91
5.4 Device Configuration
You can configure SATA disk, RAID management tool, USB disk, and UPS settings in
this section.
5.4.1 SATA Disk
This page shows the model, size and current status of the disk(s) installed on the
VioStor. You can format and check disks, and scan bad blocks on the disks. When
the SATA disks are formatted, the VioStor will create the following default share
folders:
z record_nvr: The folder for saving regular recording files
z record_nvr_alarm: The folder for alarm recording
Disk Configuration Applied NVR Models
Single disk volume All models
RAID 1, JBOD (just a bunch of disks) 2-bay models or above
RAID 5, RAID 6, RAID 5+hot spare, 4-bay models or above
RAID 6+hot spare 5-bay models or above