User manual

88
5.3.4 Host Access Control
Specify the connections to be allowed and denied to access the VioStor. Choose
one of the following options to restrict access from a network or an IP address (host)
to the server:
1. Allow all connections (Default setting)
Allow connection from all hosts to the server.
2. Allow connections from the list only
Allow connection from hosts specified on the list only.
Note: When this function is enabled, you can only use PC that the IP address
is listed on the connection list to connect or find the VioStor. The IP address
not included in the list will not be able to detect the VioStor not listed in
allowed connections.
3. Deny connections from the list
Deny connection from hosts specified on the list.
Note: Make sure your PC is added in the list of hosts allowed to connect to the
server. Otherwise, the VioStor will disconnect your PC when you apply the
new settings.