User manual

84
z Standalone
The standalone option allows you to assign different IP settings for each
network port. The VioStor can be accessed by different workgroups in two
different subnets. However, when this function is enabled, failover does not
work. You can only enable DHCP server for the primary network port (LAN 1).
z Network Transfer Rate
You can select auto-negotiation (default), 1000 Mbps, or 100 Mbps. It is
recommended to use the default setting that the server will determine network
speed automatically.
z Obtain IP address settings automatically via DHCP
If your network supports DHCP, VioStor will use DHCP protocol to retrieve the
IP address and related information automatically.
z Use static IP address
To use fixed IP address for network connection, enter fixed IP address, subnet
mask, and default gateway.
z Primary DNS Server
Enter the IP address of primary DNS server that provides DNS service for
VioStor in external network.