User manual

38
3.2.5 Auto Cruising
The auto cruising feature of the VioStor NVR is used to configure the PTZ cameras to
cruise according to the preset positions and the staying time set for each preset
position.
To use the auto cruising feature, follow the steps below.
1. On the monitoring page of the VioStor NVR, click
to go to the configuration
page of the PTZ camera.
2. Set the preset positions on the PTZ camera.
3. Return to the monitoring page of the VioStor NVR. Right click the display of the
PTZ camera. Select “Auto Cruising”.