User manual

148
Environment 4: The VioStor and the IP camera are installed behind the
router
IP Address
VioStor 1 192.168.1.101
VioStor 2 192.168.1.102
VioStor 3 192.168.1.103
Router public IP 219.87.145.205
In the example, to allow a PC which is located remotely to access each VioStor via
FTP, you need to:
Step 1. Set up port mapping (virtual server) on the router
From Forward to
VioStor 1 219.87.145.205:2001 192.168.1.101:21
VioStor 2 219.87.145.205:2002 192.168.1.102:21
VioStor 3 219.87.145.205:2003 192.168.1.103:21
You could directly connect VioStor 1 via FTP by ftp://219.87.145.205:2001
You could directly connect VioStor 2 via FTP by ftp://219.87.145.205:2002
You could directly connect VioStor 3 via FTP by ftp://219.87.145.205:2003
Step 2. Enable FTP Port Mapping on the VioStor
If you want to connect each VioStor via FTP by clicking “FTP” in playback page of
each VioStor, you need to enable FTP port mapping in “Network Settings” > “File
Services” on the system administration page and set the mapped port number.
Mapped Port
VioStor 1 2001
VioStor 2 2002
VioStor 3 2003
After finishing the above two steps, you can access the VioStor via FTP by entering
the IP address in the IE browser or clicking “FTP” in the playback page. Then login
the VioStor via the correct user name and password.