User manual

129
Chapter 6. System Maintenance
This section provides a general overview on system maintenance.
6.1 Reset the Administrator Password and Network Settings
To reset the administrator password and network settings, press the reset button of
the server for five seconds. A beep sound will be heard.
After resetting the system, you can login the server with the default user name and
password:
Default user name: admin*
Password: admin
*If you are using VS-201/ VS-101/ NVR-104, the login name is ‘administrator’ and
the login password is ‘admin’.
Note: To reset the system by the reset button, the option “Enable configuration
reset switch” in Hardware Settings must be activated.