User manual

121
z The system displays the latest 10 remote replication records for you to analyze
the status and troubleshooting.
In the above example:
1. When the status is shown as “Failed (Remote access error)”: You can check the
remote storage device is running or the network settings are correct.
2. When the status is shown as “Failed (An internal error occurred)”: You can check
the hard drive status of VioStor or check the Event Logs.
Note: The time required by VioStor to replicate data to remote storage device
varies to the network environment. If the remote replication time is too long, some
recording files may be overwritten by the system. To avoid this, it is recommended
to refer to the status messages to analyze the time needed for remote replication
and adjust the replication schedule accordingly.