User manual

107
5.6.4 Alarm Settings
You can enable alarm recording of the cameras. The recording will be triggered by
alarm input of the camera or motion detected by the camera.
When you enable the option “Activate alarm recording only on selected schedule”,
alarm recording will be activated only when alarm input is triggered or motion is
detected within the preset schedule. You could test the camera setting by clicking
“Test”. Click “Apply” to save the settings for the camera or click “Apply to all
cameras” to apply to settings to all the cameras.
Note: All the settings will not take effect until you click “Apply”. When applying
changes, recording operation will stop for a while (maximum 1 minute) and then
restart.