User manual

102
Note:
1. All the settings will not take effect until you click “Apply”. When applying the
changes, recording operation will stop for a while (maximum 1 minute) and
then restart.
2. Click “Search” to search for the IP cameras in the local network. Select a
channel for the camera and click “Add” to add the camera. By using the search
function, the camera model and the IP address are filled in automatically.
Click “Close” to close the search results.
Add generic IP camera support by CGI command
QNAP NVR provides an interface for the users to enter the JPEG CGI command of IP
cameras in order to receive the video and audio streaming data from the IP cameras
and monitor, record, and playback the video of the IP cameras on the NVR. This
feature largely enhances the compatibility and expandability of the NVR.
Please follow the steps below to configure your IP camera.
1. Select the IP camera number.
2. Select “Generic Model” for the camera brand.
3. Select “Generic JPEG” for camera model.
4. Enter the cgi path of the IP camera in “HTTP URL” field.
5. Enter the camera name or the IP address of the camera.
6. Enter the user name and password for the IP camera.
7. Select to enable recording or not.
8. Click “Apply” to save the settings.