User`s guide

Error Messages
VMS Interface for QMS Crown Printers6-2
Error Messages
The following messages may occur during installation of the host soft-
ware. Messages have the format
%QMSSMBPSE-
severity - identification , message
Severity Identification
The codes indicating the severity of messages are as follows:
Messages
This severity-
identification letter...
means the message
is...
The installation...
I Informational Is not affected
W Warning Is not affected
E Error Fails
F Fatal error Fails
This message... means... Notes
ADDRFORMINV The address
has an invalid
form.
The node address of the printer must
consist of an area number (01 to 63)
and a node number (0000 to 1023).
The valid format for the network
address is
area_number.node_number .
ADRCHG The executor
MAXIMUM
ADDRESS was
increased.
You specified an address that was
beyond the current NCP maximum
address setting. The installation
program automatically extended the
maximum setting to accommodate
your address.
AREAADDRINV The area
address is
missing or
invalid.
The valid format for the network
address is
area_number.node_number . The
area number must be between 01
and 63.