User`s guide

QMS VMS-
Supported
Parameters
VMS Interface for QMS Crown Printers4-10
The following parameters are supported:
BOOK_STYLE
The BOOK_STYLE parameter places two logical pages on each
sheet (or face) in an order that produces a booklet when the paper is
folded. The booklet can be read by turning pages from right to left or
flipped from bottom to top as if it were a notepad. Check your user’s
guide to determine if your printer supports this parameter.
COLLATE
The COLLATE parameter may be used if your printer supports colla-
tion. This parameter may be specified as on or off. Use the following
command to select this option:
$ PRINT/QUE=quename/PARAMETERS=(COLLATE= selection ) -
_$
filename.ext
» Note: The COLLATE parameter must be specified as on for STAPLE
to work. Stapling is defined for collation ranges. Turning collation off
prevents the symbiont from defining the required collation ranges.
COLLATE PAGE_GRID
BOOK_STYLE PAGE_LAYOUT
DATA_TYPE PAGE_LIMIT
DOC PAGE_MARGIN
INPUT PAGE_OFFSET
MESSAGES PAGE_SCALING
OFFSET/JOGGING SHEET_COUNT
ORIENTATION PAGE_SCALINGSHEET_SIZE/PAGE_SIZE
OUTPUT SIDES
OVERLAY STAPLE
PAGE _B ORDER