User`s guide

'(&7(.0RGHV
'(&7(.(PXODWLRQ
 <CR>
 <US>
 <ESC><FF>
 <ESC><US>
 <ESC><SUB>
In Alpha Mode, you may select from four character sizes:
You may use the DECLFF command to download different typefaces
to use instead of the default Alpha Mode faces. The fonts you down-
load must use the identical font descriptor as the resident Alpha Mode
fonts. For the two large character sizes (<ESC>8 and <ESC>9), use
QMDRGTHH03WK00GG0001UZZZZ02F000 (ASCII character set)
QMDRGTHH03WK00GG0001OZZZZ02F000 (Supp. character set)
For the two smaller character sizes (<ESC>: and <ESC>;), use
QCOURIR101VK00GG0001UZZZZ02F000 (ASCII character set)
QCOURIR101VK00GG0001OZZZZ02F000 (Supp. character set)
You may print in Alpha Mode in either one column (full page width) or
two columns in the Tekpage. Printing extends to full width if text
exceeds the middle of the Tekpage before you issue a <CR><LF> to
end each line. Printing is in two columns if you issue a <CR><LF> to
end each line before text reaches the middle of the Tekpage.
If you are printing full width, you must issue an <ESC><FF> at the
end of the last text line on the page before automatic wrapping moves
the current print position to column 2 at the top of the same page. The
<ESC><FF> continues full width printing to the next page.
<ESC>8 Large character size, Modern Gothic typeface
<ESC>9 Medium large character size, Modern Gothic typeface
<ESC>: Medium small character size, Courier typeface
<ESC>; Small character size, Courier typeface