User`s guide

'(&7(.
&RQWURO
&KDUDFWHUVDQG
(VFDSH
'(&7(.(PXODWLRQ
<LF> (Line Feed) Moves the current position to the next line
without changing the horizontal position. If
the current position is at the bottom margin,
line feed moves the current position to the
top of the Tekpage and switches margins.
Line feed also clears Bypass Mode.
<VT> (Vertical Tab) Moves the current position up one line
without changing the horizontal position.
The current position cannot move beyond
the top margin.
<CR> (Carriage Return) Moves the current position to the current left
margin (Margin-1 or Margin-2) and clears
Bypass Mode if Alpha Mode is active. If
Graph Mode is active, a carriage return
enables Alpha Mode and moves the current
position to Margin-1 (horizontally) and the
closest printable position relative to the
graphics cursor (vertically). If Incremental
Plot Mode is active, a carriage return
enables Alpha Mode and moves the current
position horizontally to the nearest left
margin (Margin-1 or Margin-2) and vertically
to the current character cursor position. A
carriage return also changes Graph Mode
vector pattern and width to the default
settings unless transparent vectors have
been specified (see <ESC><FF> for
transparent vectors).
<ESC> Begins an escape sequence. If the Escape
character occurs in an escape sequence,
the printer ignores the first escape
sequence and begins a new one.
<FS> Switches from Alpha Mode or Graph Mode
to Point Plot Mode, and resets vector pattern
and width to the default settings unless
transparent vectors have been specified
(see <ESC><FF> for transparent vectors).
<GS> Switches from Alpha Mode to Graph Mode.
<RS> Switches to Incremental Plot Mode from any
mode.