User`s guide

8VLQJ
FRQILJFDUWHPXODWLRQ
/13OXV(PXODWLRQIRU4063ULQWHUV
8VLQ
J
FRQIL
J
FDUWHPXODWLRQ
On QMS printers that support the configcartemulation operator, the
LN03 Plus Emulation default values can be changed by this operator.
You can include this operator in an ASCII file and send the file to the
printer over any interface.
The configcartemulation operator takes three integers as shown in
the following figure.
The emulation identifier ( emul# ) for the LN03 Plus Emulation is 12.
(Other printer emulations for QMS printers have different identifiers.)
The configuration selection ( item ) is the setting you want to configure.
You can configure only one setting with a single configcartemulation
operator. The selection setting ( value ) is the setting for the item .
Depending on the selection, there may be two or more possible val-
ues . For example, Product ID has three possible values.
0 Product ID
1 AutoWrap
2 Paper Size
3 Paper Size Override
4 X Origin Inset
5 Y Origin Inset
6 Reset Override
emul# item value
configcartemulation
The setting for the selected item.
12 (The identifier assigned to LN03 Plus emulation. Use this
identifier with other emulation-dependent PostScript operators
such as setdefaultemulation.)