User`s guide
&RQILJXUDWLRQ
2SWLRQV
/13OXV(PXODWLRQIRU4063ULQWHUV
3DSHU6L]H2YHUULGH
;2ULJLQ,QVHW
<2ULJLQ,QVHW
Purpose Controls the paper selection. If Paper Size Override
is disabled, the emulation uses the transformation
point for the size of paper selected and uses the
current paper size (does not change paper trays). If
Paper Size Override is enabled, the transformation
is the same as above, and the specified paper size
is selected.
Choices Off and On
Default Off
Purpose Moves the lower left corner of the image to the right
from 0 to 300 dots (1 inch at a resolution of 300
dpi). Use this option to eliminate clipping of the
right edge of the image on some systems.
Range 0-300
Default 75
Purpose Moves the lower left corner of the image downward
from 0 to 300 dots (1 inch at a resolution of 300
dpi). Use this option to eliminate clipping of the top
edge of the image on some systems.
Range 0-300
Default 75