User`s guide
'HLQVWDOOLQJWKH
406/13OXV
(PXODWLRQ
/13OXV(PXODWLRQIRU4063ULQWHUV
For a serial connection:
copy /b ln03-del.ps com#↵
where # is the port number (1 to 4).
On most new QMS printers (for example: a QMS 2060, 2425,
or 4060),
a page is printed with a message stating that the
LN03 emulation was removed.
3 Restart the printer if it doesn’t automatically restart.
»Note:
Some QMS printers automatically restart themselves at
this point.
The LN03 Plus Emulation is now no longer listed in the Options
section of the printer’s start-up page, in the Administration/Emula-
tion section of the printer’s configuration menu, and on the
advanced status page. On some older QMS printers, emulations
are not listed on the printer’s start-up page.
'HLQVWDOODWLRQYLDDQ(WKHUQHW1HWZRUN
&RQQHFWLRQ
This procedure is used to deinstall the QMS LN03 Plus Emulation
from printers over an Ethernet network. If you want to deinstall the
option via a parallel or serial port, refer to “Deinstallation via a Parallel
or Serial Port” on page 1-11.
»Note:
Before you begin this procedure, your printer and your PC (or
UNIX workstation) must be connected to an Ethernet network running
TCP/IP and have valid IP addresses.
1 If your computer is running Windows, change to DOS.
2 Insert the LN03 Plus Emulation diskette into your PC’s 3.5"
disk drive.
3 Change to that drive (for example, if the diskette is in the A
drive, type a:↵ at the DOS prompt).
4 If you’re downloading the deinstallation file (LN03-DEL.PS)
from a UNIX workstation, copy the file from your PC to a tem-
porary directory on your workstation.