User`s guide
'HLQVWDOOLQJWKH
406/13OXV
(PXODWLRQ
,QVWDOODWLRQ
'HLQVWDOOLQ
J
WKH406/1
3OXV(PXODWLRQ
Deinstalling the QMS LN03 Plus Emulation is similar to installing it.
As the installation file was downloaded to the printer, the deinstalla-
tion file must also be downloaded to the printer. However, because
the deinstallation file is not supplied zipped as is the installation file,
the deinstallation file can be downloaded from the diskette drive on
your PC rather than from the hard drive.
'HLQVWDOODWLRQ YLDD3DUDOOHORU6HULDO3RUW
This procedure is used to deinstall the QMS LN03 Plus Emulation
from printers via a parallel or serial port. If you want to deinstall this
option over a network, refer to “Deinstallation via an Ethernet Network
Connection” on page 1-12.
1 If your printer has an Administration/Emulations/PostScript/
Emulation Level menu, set it to Level 2.
2 Download the deinstallation software to the printer.
a If your computer is running Windows, change to DOS.
b Insert the LN03 Plus Emulation diskette into your PC’s 3.5"
disk drive.
c Change to that drive (for example, if the diskette is in the A
drive, type a:↵ at the DOS prompt).
d At the DOS prompt, enter one of the following commands as
appropriate:
For a parallel connection:
copy /b ln03-del.ps lpt#↵
where # is the port number (1 to 3).