Setup guide

*1
"
If you’re using a PC, the following system software:
If you’re using Windows, version 3.1J or later
If you’re using DOS, version 5.0J or later
+,$%($
Caution:
The Kanji fonts are factory installed on a formatted hard disk drive. DO NOT
reformat or initialize the QMS Kanji internal hard disk. Reformatting erases all data,
fonts, and files on the disk. Your warranty does not cover this error.
The Kanji font internal IDE hard disk is installed on the controller board in the same
way any internal hard disk is installed. See chapter 5, “Storage Devices,” for detailed
steps on installing an internal hard disk.
Caution:
If you already have a hard disk, you need to retrieve the fonts and forms and
system code and place them on a new hard disk. If you already have an internal hard
disk installed, you must remove it before you can install the Kanji disk.
+
See chapter 5, “Storage Devices,” for information on how to configure your printer’s
memory when using an internal hard disk.
' 4
The QMS QFORM option allows you to use existing lineprinter and forms printing
applications on your QMS
magicolor
2+ Print System. This printer resident application
gives you the ability to store PostScript forms on the printer’s hard disk and fill those
forms with your application’s ASCII print stream. Features include
Definition of page formatting and fonts
Duplexing with binding-margin offsets
Two-sided forms with text fill-in on front and/or back
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500