Setup guide

#,*

figuration menu. For complete information about the emulation’s configuration options
for CALS and TIFF, refer to the documentation that comes with the ImageServer
option.
1
Optional fonts are available as PostScript files on floppy disks. This section describes
how to download optional fonts from a floppy disk to the printer’s hard disk.
»Note:
At least one hard disk (internal or external) must be present on your printer
before you can download a font. If more than one hard disk is available, the font
automatically installs itself on the disk with the most free storage space.

' 
We recommend that you use CrownAdmin to download fonts. Refer to the
CrownAdmin online help for instructions.
'!!!!("
This procedure contains the instructions for downloading the fonts from a floppy disk
onto your printer’s hard disk.
1 Connect the PC to the printer’s parallel or serial port.
2 Turn on the printer, and wait for IDLE to appear in the message window.
3 Insert the font disk in your PC’s 3.5" disk drive, and change to that drive (for
example, if you’re using the A drive, type a:↵).
4 Send the fonts to the printer’s hard disk.
 If your PC and printer are connected through the parallel port, type
copy /b *.ps lpt
#
↵
where
# is 1 to 3. (/b refers to binary files.)
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]