Setup guide

! 
"#
 
——
 !" —!!!
1 Access the Administration/Miscellaneous/New System Image menu.
2 Select Yes in the New System Image menu.
The printer automatically reboots and waits for the new system software (image)
to be sent via your PC’s parallel port.
3 Send the new system image to the printer.
 Type
copy /b *.dl lpt
# ↵
where
# is 1 to 3. (/b refers to binary files.)
»Note:
In some cases, the extension to the file may be ps.
4 While the system software is loading, the Online LED blinks off and on, and
the message window displays
Downloading image
via parallel port.
5 After the new system software has been written to ROM, the printer reboots
itself to activate the new system software.
»Note:
The new system image doesn’t erase the old image until the printer verifies
that the new image is valid.
6 Print another advanced status page, and verify that the configuration set-
tings are the same.
Menu
Administration/Miscellaneous/New System Image
Choices Yes
—Download new system code
No
—Don’t download new system code
Default
No
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]