Setup guide
!
"#
If you have the IP scheme set incorrectly on your PC, then you will get
the following:
3 If you are running a UNIX box:
a Open a window on your UNIX box.
b In the window, type:
ping
ipaddress
↵ (for example, ping 161.33.131.62↵)
Now that you know it is up on the network, you need to ftp and “put” the system code
to the printer.
We assume that you have a system file, for example “system.ps” on your hard drive,
and that you are in the directory where this file resides. We also assume the printer is
in an “idle” state.
1 On a Windows machine, get to a DOS prompt. On a UNIX machine, open a
new window and type:
ftp
ipaddress
↵ (for example, ftp 161.33.128.5↵)
2 When prompted for a user name and password, press Enter for both.
An ftp> prompt displays.
»Note:
If a message displays denoting invalid password, contact your system
administrator. Otherwise, continue.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500