Specifications

Duplex
3-3Operator Control and Installation Menus
Duplex
The Duplex option enables printing on both sides of a sheet. The
default setting is Off. Unless you want all jobs printed in duplex mode,
do not change the default setting. The best way to specify duplex
printing is through your application. In that case, use it to turn duplex
mode On and Off, and leave this option set to Off.
The illustration below shows the duplex and tumble duplex options.
Tumble Duplex
The Tumble Duplex option controls the default settings for duplex
mode. When using tumble duplex, both the Duplex and Tumble
Duplex options must be On. The default setting is Off. The illustration
below shows the difference between duplex and tumble duplex.
Landscape
Portrait
Landscape
Portrait
DUPLEX
TUMBLE DUPLEX
Side 1
Side 2
Side 1
Side 2
Side 1
Side 2
Side 1 Side 2