Specifications

Installing Print

System Software

QMS 4525 Print System Administrator's Guide1-16

9 You have now completed installing the system software and

are ready to boot the system. Press the Back key. The mes-

sage window displays the following message:

QMS Softload

x.x

Install To Disk

10 Press the Previous or Next key until the message window

displays:

Boot System Hard Disk

11 Press the Enter key and the following displays:

Boot System Hard Disk 6

12 Assume that hard disk 6 is the print system's internal hard

disk. If you have any external hard disks connected, you can

cycle through them by pressing the Next key. For this exam-

ple we are using the internal hard disk. Press the Select key.

The system begins loading, and the following message dis-

plays:

Boot System booting /

13 At this point, DO NOT TOUCH ANY KEYS until the system

has completed loading. The slash bar on the right end keeps

rotating until the download is completed. As soon as down-

loading is done, the BootROM gives the CPU to the down-

loaded image immediately. When the system rebooting and

printer initialization is complete, the following message dis-

plays:

IDLE

 1RWH, I\RXWRXFKDNH\GXULQJWKLVVWH

\RXPX VWV WDUWRYHUD WVWH





