Specifications

PCL 5 Emulation
DOC Commands
E-53Manual Updates
Notes This ID must be specified. It indicates the resource from which
the desired object is to be removed. There is no way to specify
“all resources”. If an install command precedes the remove
command, the remove command is ignored (these
commands are mutually exclusive). If the disk does not exist,
PCL issues the NO SPACE FOR FONT, MACRO, OR
PATTERN error message.
Parameter
object id
Purpose Specifies the ID of the object that is to be removed from the
printer system.
Default -1 (wild card)
Range *, -1 to 32767
Format Integer
Notes If the
object id is not specified, or it is specified as “*” or “-1”, all
objects on the specified resource with the specified object
type are removed.
Parameter
object type
Purpose Specifies the kind of objects that are to be deleted from the
specified print system.
Default n/a
Range *, font, macro, pattern, or other object type
Format Character
Notes If
object type is “*” or is not specified, then all objects on the
specified resource with the specified object id are removed.
Command: Remove Resource
Syntax %%IncludeFeature: removeresource
(resource id object
id)
Purpose Identifies an external object that is to be removed from the
print system.