Specifications

QMS Crown
Technical
Reference Manual
Updates
QMS 4525 Print System Administrator's GuideE-10
Command setdefaultjogmode
Syntax integer setdefaultjogmode --
Purpose Sets the default jogmode. This does not take effect
until the start of the next job.
CCITT Group 3 and 4 Commands
The following new CCITT group 3 and 4 commands are supported on
the 4525 Print System. See the QMS Crown Technical Reference
Manual , for information on all other supported CCITT commands.
Command %%DPI
Syntax %%DPI( horizontal vertical )
Purpose Sets the horizontal and vertical dots per inch to be
used for image expansion.
Parameter integer
Range 0 to 4
0—Do not jog
3—Jog at each set
Notes If you change the default value for jogging it does not
affect the current job. However, if the default value is
changed, the engine's nvram values for jogging are also
changed.
Errors rangecheck, stackunderflow, typecheck
Parameter: horizontal
Purpose Sets the horizontal dots per inch
Default Current engine resolution (300)
Range 1 to 9999
Parameter vertical