Specifications

Connecting via the
Serial Port
QMS 4525 Print System Administrator's Guide11-14
delete it. Then type
mode lpt1:,,p
in the AUTOEXEC.BAT file so that print jobs are sent until the
printer accepts them. Reboot your computer and try the com-
munication test again.
If the communication test still does not work, see chapter 6, “Trouble-
shooting,” in the User's Guide and refer to your DOS documentation
for more information.
Refer to appendix B, “Cable Pinouts,” for cable pinout information.
Connecting via the Serial Port
Serial communication is best if
 A parallel port is not available on your host
 The host is more than 6.5 feet (approximately 2 meters). For
best results, the serial cable should be less than 25 feet
(approximately 7.6 meters) long.