Specifications

Connecting via the
LocalTalk Port
QMS 4525 Print System Administrator's Guide11-6
nating resistors if you are connecting the printer to a single Macin-
tosh.)
Your PhoneNET and Macintosh documentation contains further infor-
mation on AppleTalk networks and the proper termination of the
transformer boxes.
Making the Connection
Use the following procedure to connect your printer to the host.
2 &DXWLRQ 7XUQRIIERWKWKH
S
ULQWHUDQ GWKHKRVW EHIR UHPDNLQJWKH
FRQQHFWLRQ
1 Connect the DB-9 connector from one transformer box to the
printer's LocalTalk port.
2 Plug the DIN-8 connector from the other transformer box into
the Macintosh port.
3 Plug one end of the RJ11 cable into the transformer box at
the printer and the other end of the cable into the trans-
former box at the host.
4 Insert terminating resistors into any open sockets in the con-
nector boxes. This keeps the printer from falling off the
Chooser.
DIN-8 Male Connector 9-Pin Male
Host
DIN-8 Female Port
Printer
9-Pin Female
RJ11 Cable
Terminating Resistors
Transformer Boxes