Specifications

Setting Up the
Stacker/Stapler
10-3Stacker/Stapler
this chapter) gathers output into batches of 35 sheets or less to
be stapled.
 Upper bin
The upper bin receives stapled print jobs, offset-stacked print
jobs, and stapled offset print jobs. It also receives overflow when
the stacker bin is full. See “Emptying Output Bins” later in this
chapter.
 Stacker bin
The stacker bin receives stapled or unstapled print jobs. Offset
stacking is also available. See “Bin Capacities” and “Emptying
Output Bins” later in this chapter.
Setting Up the Stacker/Stapler
Use the Finisher Setup menu to set the stacker/stapler operating
mode, bin capacities, and output bin names. Use the Stapling option
in the Operator Control menu to enable or disable stapling.
The Finisher Setup menu appears under the Engine Setup menu only
if your printer has a stacker/stapler installed. Use this menu to set the
stacker/stapler operating mode, maximum capacities of the batch tray
and the stacker bin, and the output bin names.
Administration / Engine Setup / Finisher Setup Menu
Mode
Bin Capacities
Output Bin Names
Offset Stacking
Stapling
Mode
Use the Mode option in the Finisher Setup menu to select the output
mode. Refer to “Offset Stacking” and “Using the Stapler,” later in this
chapter, for information on selecting these features.