Specifications

About this Manual
QMS 4525 Print System Administrator's Guide1-2
About this Manual
This manual is designed to help the system administrator configure,
control, monitor, and maintain the QMS 4525 printer, including the
optional sorters and the stacker/stapler.
 Chapter 1 - Introduction
Introduces the manual, describes typographic conventions, lists
the contents of your shipment, tells you how to register the war-
ranty on your printer, and covers power-up diagnostics and printer
diagnostics. Also covered in this chapter are the instructions on
how to reinstall system software in case of system failure and
how to install system upgrades.
 Chapter 2 - Printer Configuration
Explains how to use the keys on the printer control panel, and
how to use the menu system to control and configure the printer.
 Chapter 3 - Operator Control Menu
Describes how to specify the default number of copies to print,
whether to print in duplex or tumble duplex (or neither), whether
to collate or use an optional sorter bin or the stacker/stapler, what
the default page orientation is, which paper size combination the
paper trays are set up for, and whether to use accounting.
 Chapter 4 - Communications Menu
Describes the Communications menu that you use to set commu-
nications timeouts and how to configure the serial, parallel,
AppleTalk, and optional communications interfaces.
 Chapter 5 - Emulations Menu
Describes the Emulations menu that you use to set the default
configurations of the PostScript, CCITT, PCL 5, HP-GL,
imPRESS, Lineprinter, and LN03 Plus emulations, and the ESP
default language.