Specifications

Control Panel—

BootROM User

8-23Engine, Miscellaneous, and Disk Operations Menus

Install to Disk

Use the Install to Disk option to copy files from diskette or the parallel

port to hard disk. A new image is installed to disk only when image

validation is done.

Install to Disk menu

Diskette

Parallel

Install to Disk via Diskette

Use the Diskette option to install a floppy diskette to the hard disk

using the following procedure:

1 After the BootROM User menu displays, press the Previous

or Next key until the following displays in the message win-

dow:

QMS Softload

x.x

Install To Disk

2 Press the Enter key to access the Install to Disk menu and

the following displays:

Install To Disk Diskette

3 Press the Enter key to install the files from the diskette to the

hard disk. The following message displays

Install To Disk Target Disk 6

4 Disk 6 is the printer's internal hard disk. Press the Previous

or Next keys to display other disks or press the Enter key to

select hard disk 6 as the target.

5 Open the printer's left-side door to access the floppy disk

drive. (See the illustration in the section on “Installing an

Option” earlier in this chapter.)