User`s guide

5. Slide the module into the printer using the slot guides.
6. Make sure the module is firmly seated by placing your free
hand on the front of the printer and firmly pushing against the
knob of the access panel.
7. Replace the screw at each corner of the access panel. Plug in
power cord and interface cables; then turn on the printer.
8. Print a test configuration page by taking the printer offline;
then push the TEST/CANCEL button. Wait for the two pages
to print. The test configuration page should show the RAM
size according to the size module you installed.
Fig. 4.13 Slide Module into Printer
♦
Chapter 4
Using Optional Accessories 4-19