User`s guide

2. Under the printer’s interface ports is a sheet metal access panel
(fig. 4.12). Use the Phillips screwdriver to remove the screws
from the sides of the panel. Remove the access panel.
3. Remove the memory upgrade module from the anti-static bag
along with the packet containing two small Phillips head
screws.
4. Align the memory upgrade module on the access panel by
matching the holes on the panel and the end of the memory
upgrade module. Place the two screws (those included with
the memory upgrade module) through the upgrade module and
access panel to fasten them together.
Fig. 4.12 Remove Screws from Side of Panel
Chapter 4
4-18 Using Optional Accessories